Place of Origin:
20KW heavy duty washing machine for hospital With Safety Door Interlock System
1, The specification of 20KW heavy duty washing machine for hospital With Safety Door Interlock System :
1. Fully automatic, microcomputer-controller,freely programmable,30 possible programmes,operator could set flexible.
2. High quality stainless steel, good appearance, long life.
3. Full suspension shock structure,low shake, low noise,combination of shock absorbers and springs for maximum absorption, need no excessive foundations.
4. Imported bearing, precise and durable.
5. Fixed screws support for long-distance transportation, avoid shaking damage during transit.
6. High quality inverter system, easily realize washing and extracting frequency stepless adjusting.
7, Multiple sealing system, oil sealing , water sealing, stainless steel sealing.
8, Built-out bearing lubrication, simple operation, convenient maintenance.
9, Safety door interlock system, reduce fatigue, misuse and the risk.
2, Product specification of Stainless Steel hotel Barrier Washer Extractor hospital Laundry Washing Machine :
|Model||Capacity||Drum diameter||Drum Depth||Motor power (kw)||Washing speed||Low extract||High extract||G-force||Steam pressure||Motor power||Size||Weight|
The maintain of 20KW heavy duty washing machine for hospital With Safety Door Interlock System :
1) regularly check the tightness of the washout triangle belt. Once the tightness is found, it is necessary to adjust immediately or replace the new triangle belt.
2) when washing the clothes with hot water in the washing machine, the water temperature should not exceed 45 degrees.
3) when using the washing machine, it is necessary to strictly operate the instructions on time and prevent failures.
4) disposable clothes should not be overloaded, and should not exceed 80% of the capacity of the washing machine and 50%.
5) the washing machine must be placed in a well ventilated, dry, direct sunlight without combustible and explosive materials.
6) after washing machine, remember to wipe the inside and outside of the equipment with soft dishcloth to prevent failure.
7) once a month or about 30 times per wash, pour the lubricant (lithium grease No. 3) into the oil cup after washing.
8) regularly check the connection of the eloquent gas box, and whether there is any loosening phenomenon. Once it happens, it can be adjusted in time.
9) regularly check whether the discharge port of the bottom of the washing machine bearing seat is open, so as to ensure that there is no water accumulation in the bearing seat, thereby prolonging the service life of the washing machine.
Send your inquiry directly to us